Index to Illustrations

Details: Category: MAC Instruction Book; 06.Mar; Hits: 727

Note: page numbers referred to are from the original manual.

Fig	1	Front hub - Sectional View	9
Fig	2	The steering head	11
Fig	3	The Velocette telescopic fork	13
Fig	4	Draw bolt for fitting head bearing cups	14
Fig	5	Oil tank, ball valve, and filter	17
Fig	6	Crankcase suction filter	20
Fig	7	Dynamo belt adjustment, etc	21
Fig	8	Positions of rocker cover bolts	23
Fig	9	Cylinder head and rocker assembly	23
Fig	10	Setting of valve guides	25
Fig	11	Diagram of clutch operating mechanism	27
Fig	11a	Diagram of clutch operating mechanism	27
Fig	12	Adjustment of clutch	28
Fig	13	Sleeve gear nut and peg spanner	32
Fig	14	Sleeve gear nut adapter X2959	34
Fig	15	Kickstart ratchet and springs	35
Fig	16	The gearbox end cover, etc	36
Fig	17	Lucas automatic timing unit	38
Fig	18	Removal of oil-pump and crankshaft pinion	39
Fig	19	Pump alignment tool X2719	40
Fig	20	Crankshaft pinion extractor X2721	41
Fig	21	Positions of timing marks	46
Fig	22	Ballrace retaining ring tool X2725	51
Fig	23	Positions of selector forks	52
Fig	24	Rear hub assembly Sectional view	34
Fig	25	Rear suspension adjustment	55
Fig	26	Assembly tool X2992	57
Fig	27	Torque tube clamp tool X2938	58
Fig	28	The Amal carburetter (Section)	60
Fig	29	Section of pilot passages	60
Fig	30	The Carburetter	63
Fig	31	Phases of throttle openings	64
Fig	32	Fuel tap and strainer	66
Fig	33	KLG sparking plug	67
Fig	34	Miller dynamo Commutator end	69
Fig	35	Miller dynamo Exploded view	71
Fig	36	Miller bearing lock ring spanner	72
Fig	37	Miller cut-out	75
Fig	38	Wiring diagram (Miller lighting set)	76
Fig	39	Theoretical diagram (Miller dynamo and Regulator)	77
Fig	40	Lucas type KIF magneto	80
Fig	41	Rear brake and rear chain adjustment	83
Fig	42	Pannier frame and bags	86