Periodic Maintenance

OIL TANK	Drain, clean feed filter, and re-fill to within 1-in from top of tank (i.e., 2-ins. from top face of Filler neck) after every 2,000 miles running. On new or reconditioned engines this must be done after the first 500 miles and at 2,000 miles. At the same time clean Suction filter. Remove crank case drain plug, drain, and re-fit
GEARBOX	Every 5,000 miles drain completely. Remove level plug, re-fill with oil. When surplus oil is drained out re-fit level plug. On new or reconditioned gearboxes this must be done after the first 1,000 miles.
CLUTCH	Check adjustment for free movement. See page 51 if adjustment is needed.
WHEEL BEARINGS	These are packed with high-melting point grease during manufacture. Dismantle bearings and re-pack with grease every 10,000 miles.
SPEEDOMETER REDUCTION GEARBOX	Grease every 1,000 miles. (Do not over-lubricate as excess grease may get on to the brake linings and reduce the efficiency of the brake).
BRAKE CAM BEARINGS	Grease every 1,000 miles. (Do not over-lubricate as excess grease may get on to the brake linings and reduce the efficiency of the brake). Oil felt washers behind cam levers
STEERING COLUMN	Grease every 2,000 miles.

Every 3,000 miles the following should receive attention :-